Testimonials
"We are pleased to engage with Wipro on engineering projects ... Wipro's
expertise will be a valuable asset to Brocade as we develop innovative new
products."
Kumar Malavalli,
Co-Founder & Strategic Advisor
Brocade Communications
|
Home
Product Engineering Solutions Case Studies |
| Industries Served |
Services Offered |
Telecom |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Industries Served
IP Multimedia Networks
|
|
|
|
| Sustenance and Enhancement of Contact Center Applications |
Migration of Intelligent Network Application to New IVR Platform |
| Wipro helped the client through sustenance of TDM interface components, qualification of the ACD software release, feature enhancements and etc. |
Wipro met the challenges of migration of existing applications, through environment setup, porting, unit testing, integration testing, verification runs, patching and documentation, updates and training.
|
| More |
More |
| |
|
| Product Ownership for a Large European Enterprise Switch Vendor |
Towards Integration of Audio Bridges to the Web Conferencing Solution |
| Product Ownership for a Large European Enterprise Switch Vendor. |
The client engaged Wipro in certifying the end-to-end solution and for providing services to service providers towards the integration of the audio bridges to the solution. |
| More |
| |
More |
| |
|
| Technology Consulting in Niche NGN Area |
Product Strategy Consultancy for IP PBX Vendor |
| Partnering with the client, Wipro evaluated companies in the Telecom NGN area for "Series C" funding and improved the RoI for potential technology investments. |
Wipro helped the client to introduce a new IP PBX product range by comparing various existing products, recognizing differentiating factors and strategizing product and market positioning. |
| More |
More |
| |
|
| Taking Complete Engineering Responsibility of the SCP / Parlay Gateway Product |
Developing a Prepaid IN Application |
| Wipro took complete product engineering responsibility of the client's SCP / Parlay Gateway product and enhanced it to make it ready for IMS network by supporting necessary interfaces and infrastructure on the platform |
Wipro worked towards developing a prepaid IN application and a model to perform performance-capacity analysis for a prepaid GSM network that enableed higher revenue generation and better network resource utilization for the client. |
| More |
More |
| |
|
Industries Served
Broadband & Optical Networks
|
|
|
|
| Mini-DSLAM Product Engineering Supporting Ethernet Based DSL Aggregation |
Design and Development of Network Management System |
| The product that Wipro developed for the customer was cost-effective and reduced project management overheads for the customer. |
Wipro handled the complete development of NMS, right from developing functional specifications, architecture till system integration testing.
|
| More |
More |
| |
|
| Design and Development of MPLS |
Terabit Router Development Including Software and Hardware |
| Wipro’s domain expertise in MPLS and VPN, coupled with project execution skills, helped the customer to develop the solution in a short span of three months. |
Effectively combining process, technical and project management expertise, Wipro met the key challenges of the customer successfully. |
|
More
|
More
|
| |
|
Industries Served
Wireless Networks & Devices
|
|
|
|
| Application Porting and Optimization of J2ME |
Smartphone – Application Testing |
| A mobile communication player chose Wipro to port PC games to mobile platform using J2ME. |
Wipro’s years of experience in process based quality Smartphone testing enabled it to partner a major player in mobile communications industry. Wipro was responsible for the end-to-end test strategy including plan, design, execution and audit for the testing of plethora of applications on the Smartphone. |
|
More
|
More
|
| |
|
| Implementation for DRM V2 on a Proprietary Platform as per OMA Specifications. |
Linux Based Porting |
| Emerging market dynamics demanded that the client, one of the global handset vendors to work towards getting ready for launching DRM based products as per OMA specifications. Wipro partnered the client in implementing the domain and rights module for DRM V2, initially developing it on Windows platform and then porting it to the client proprietary platform.. |
Wipro partnered a major semiconductor vendor for base porting of Linux on third party platform. |
|
More
|
More
|
| |
|
| Application Development for Linux Based Handheld |
Client Provisioning UI Application Development as per OMA Specifications |
| A major mobile phone vendor selected Wipro for Application development on a Linux based handheld. |
Wipro was chosen by a major handset vendor for high quality design and development of a client provisioning UI application on its proprietary framework compliant to OMA specifications. |
|
More
|
More
|
| |
|
| S60 Application Testing |
Symbian Base Porting |
| A leading licensee of S60 selected Wipro, a S60 Competence Center, to take complete responsibility of functional testing of S60 user interface for standard applications that also involved development of S60 executable test suites.; |
A global semiconductor vender chose Wipro, a Symbian Platinum Partner for base porting of Symbian on a third party platform. Wipro helped the client to implement and integrate his requirements. |
|
More
|
More
|
| |
|
| Voice Call Application on Symbian |
WCDMA Phone Applications Development |
| A leading wireless communication vendor chose Wipro to develop a voice call application base on Symbian OS. Wipro developed the application on UIQ and Symbian 7.0. |
A leading US mobile phone platform vendor chose Wipro’s integrated offering of design, development and end-to-end verification solutions for all categories of mobile phones to develop 3G mobile phone application. |
|
More
|
More
|
| |
|
| Windows Base Porting |
Pocket PC Phone Application Development |
| Wipro partnered a major semiconductor vendor for base porting of Windows on third party platform. Wipro even completed testing of all BSP components including HAL, IrDA, LCD, UART, backlight, keypad, power management, Compact Flash, E-Boot, RTC, MMC/SD, Audio/Video Codec. |
A Portable Data Terminal (PDA) running Pocket PC 2002 had a GSM modem integrated into it. The PDA was not able to utilize the GSM modem as Pocket PC Phone edition 2002. Wipro was then chosen by the customer to develop an application that would enable realizing cell phone functionality in the PDA. |
|
More
|
More
|
| |
|
| 3G RNC Testing |
GSM / GPRS BSC Feature Development |
| Wipro partnered a leading UMTS RNC vendor where it took the end-to-end testing responsibility, right from design through development and execution of the test suite / test cases. Wipro also provided fixes / patches to the bugs that were discovered. |
Wipro was the partner of choice for the customer to add and enhance features in its BSC product line to support enhanced technologies in order to fulfill market needs. |
|
More
|
More
|
| |
|
| |
|
| Development of CPRI Interface HW and SW for Base Transceiver Station (BTS) |
GSM BSC End-to-End Testing |
| One of the leading CDMA wireless equipment vendor chose Wipro as a partner for development of a Common Public Radio Interface (CPRI) card for its next generation of BTS. Wipro was involved in the architecture, design, development and testing of the CPRI hardware and software for the BTS and in the subsequent integration testing with other network elements. |
Wipro became the partner of choice for the customer in taking complete ownership of end-to-end network elements testing activities for a GSM base station controller product. |
|
More
|
More
|
| |
|
| UMTS RNC Call Processing Software Development |
Design of 1X EV-DV Board for CDMA Air Interface |
| Wipro partnered a global telecommunications equipment vendor with design, development and testing of call processing software for 3GPP standards based on UMTS RNC. |
Wipro partnered a leading wireless communications product vendor for owning the design of 1X EV-DV board for CDMA air interface which included the end-to-end hardware design solution responsibility. |
|
More
|
More
|
| |
|
| Migration of GSM Legacy BSC Software to ATCA Platform |
System Integration Testing for GSM-R |
| The customer chose Wipro to migrate its GSM BSC software based on legacy platform to ATCA platform. The requirement was driven by the customer’s desire to make its product compelling as per he latest market demands. |
Wirpo helped a leading network equipment vendor in the system integration testing of GSM-R network elements and in customer acceptance testing of GSM-R customers. Wipro’s domain knowledge in GSM and testing expertise helped uncover many high priority bugs in initial phases and thereby developed new test cases, quick automation and faster resolution. |
|
More
|
More
|
| |
|
| Feature Development of UMTS RAN Protocols |
Improving Performance and Developing New Features to Create a Carrier Grade Value Adding Messaging Server |
| Wipro partnered a leading vendor of wireless solutions to develop various features for RRC, NBAP and MAC protocols based on 3GPP specifications. Wipro worked in closed coordination with the customer in design, development and testing of the protocols. |
Wipro developed a technical solution to improve the product performance of a messaging server, developed new features and ensured the client had a carrier grade system at hand. Wipro adopted the Six Sigma methodologies to identify the bottlenecks in the system and eliminate them for a smooth functioning of the system. |
|
More
|
More
|
| |
|
| Internet-Over-the-Air (WAP Gateway) Solution |
Element Management System for Indoor / Outdoor Units of a Radio Backhaul System |
| A Japanese telecom major chose Wipro to implement a solution for the Internet-Over-The-Air (WAP Gateway). Wipro developed the fit-for-any market solution that included high amount of flexibility, options of customization, user friendly system monitoring GUI and flexible billing interface based on scalable and robust architecture. |
A leading communications product vendor chose Wipro to take complete engineering ownership in developing Element Manger System (EMS) for indoor / outdoor units of a radio backhaul system. |
|
More
|
More
|
| |
|
| Wipro's WITS for Performance Testing For HLR |
Complete Product Engineering Ownership of CDMA BSC transcoder enables customer to direct their efforts in Next Generation Products |
| A Leading Wireless Service Provider was look ing for a partner to develop a user friendly , flexible and a highly efficient performance testing tool for its newer versions of HLR . Wipro’s expertise in this area and its ability to develop this high quality tool based on its in - house developed "WITS" testing framework made it the most suitable to partner the Service Provider . |
As CDMA technology continues to evolve to meet growing expectations for end user services, a CDMA BSC which is part of Radio Access Network has to keep pace with the changing market requirements and at the same time have a minimal cost on product engineering. Emergence of new markets demands telecom infrastructure vendors to re-deploy their engineering work force into new product development. |
|
More
|
More
|
| |
|
| Testing OMA compliant Presence Server with Manifold Improvement in System Performance |
Multimedia Interface (MMI) development for a high end Mobile phone |
| A Leading European wireless Network Infrastructure Vendor chose Wipro for testing its OMA IMPS compliant Presence Server .Wipro’s vast experience in taking complete ownership of end –end testing and its time tested quality practices made it the perfect partner for this Customer .As part of this Wipro took responsibility and successfully performed the test design , automation and execution for testing the Presence Server and brought a very significant improvement in System Performance . |
Wipro enabled a Japanese Handset Vendor to beat the time to market pressure by taking complete responsibility of Design, Development and Testing of MMI for a high end Mobile phone by effectively overcoming the challenges of an evolving product and linguistic barriers |
|
More
|
More
|
Industries Served
Aerospace Defense & Satellite
|
|
|
|
| Complete software lifecycle for an Aircraft Cabin Electronics System |
Access layer application for InFlight Entertainment (IFE) controller |
| To handle the complete software lifecycle including development of all the software modules in the aircraft cabin electronics system. This encompassed defining the architecture, interfaces and drivers for the system. |
To develop a access layer application for controlling the IFE controller from the customer’s Cabin electronic systems. |
|
More
|
More
|
| |
|
| Crew Signaling Software |
Validation of Satellite tracking product |
| To develop a software to allow crew members to signal the cockpit from their allotted areas |
Delay in shipping of the new product due to product issues - Inconsistencies in product functionality and performance - Interoperability issues with multiple modules that were part of the product. |
|
More
|
More
|
| |
|
| Upgrading VSAT Terminal Configuration application |
Ownership of Sustenance and Development of Technical Manuals |
| The customer was highly dependent on proprietary architecture and OS extensions for their existing VSAT Terminal configuration application. They needed a separate maintenance terminal to run the configuration application and hence the communication interfaces of the application had to be upgraded apart from revamping its DOS based GUI. It should be noted here that application porting was outside their core competence. |
Complete responsibility of Sustenance for all manuals worked on by offshore publications team. This includes documents like configuration and management manuals, installation guides, reference manuals, programmer’s guides, etc. |
|
More
|
More
|
| |
|
| Satellite Phone Testing |
Human Machine Interface (HMI) for highend driver information system |
| Need for quick time to market for the new satellite based cellular handset (CDMA IS95) - Lab setup to be done for system testing and compliance testing - Reduce testing time using test automation strategies - Maximize reuse of existing scripts by modifications to work in new test setup |
Complete GUI based HumanMachine Interface (HMI) for a highend driver information system integrating modules such as GPS, GSM, audio, RDS radio, etc., into an ergonomic interface. |
|
More
|
More
|
| |
|
| Support for new type of PSAP protocol for Emergency service product |
Integration testing of Aircraft’s Cabin Interconnection Data System |
| To provide support for a new type of PSAP (Public Safety Answering Point) protocol without an ALI (Automatic Location Identifier) database for a Emergency service product W911 |
The customer needed a hardware software integration test framework for the Cabin Interconnection Data System (CIDS) with the Director Main Board (DMB) for the A340 aircraft. Also, the testing had to be performed in simulated aircraft environment and for multiple situations in compliance with DO178B Level C. |
|
More
|
More
|
| |
|
| Logistic Management on Wheels |
| To optimize transport, forecast demand, and thereby reduce cost per quantity delivered |
|
More
|
Industries Served
Storage Systems
|
|
|
|
| Enterprise SAN Management Made Easy |
Enhancement of the SAN Management Product |
| Developing a storage management solution using SMI-S for FC switches. This solution exposes WBEM-based APIs and a data model (based on SMI-S) that would allow Storage Management applications to manage the FC switches in a vendor independent manner and at the same time providing them the extensions (proprietary) wherever standards are not available. |
To enhance the SAN Management product from a leading storage switch vendor; add features to solve key manageability pain points of the customers and make it a compelling product. Execution of the project is done at the offshore thus providing greater ROI. |
|
More
|
More
|
| |
|
| Element Manager Solutions with Enterprise Manager Features |
Data Migration made Easier |
| To provide an intuitive and easy-to-use element manager, enables organizations to monitor and manage fibre channel switches and small SAN fabrics. Administrators can perform tasks by using a Java-capable web browser from standard laptops, desktop PCs, or workstations at any location within the enterprise. In addition, web tools access is available from Web browsers through a secure channel via HTTPS. |
The enhancement and maintenance of a data migration console and agent to configure and monitor a data migration application residing on a FC switch in a fabric. It provides the user the ability to graphically manage multiple instances of the data migration application and abstracts the application’s CLI. |
|
More
|
More
|
| |
|
| How Wipro helped a leading industry solution provider port its Enterprise Suite on multiple platforms. |
In-band Appliance-Based Data Migration Tool |
| Release the Enterprise Suite on Multiple Platforms. The enterprise suite was primarily available on Solaris and Linux. It was to be ported to Windows and HPUX. |
Developing an in-band appliance based data migration tool, which migrates data from one storage array to another. The migration is done at network based, unlike the host based migration solutions - this solution would migrate between heterogeneous arrays and the solution is platform independent. |
|
More
|
More
|
| |
|
| Scanning of Files Stored on NAS Storage Device |
How Wipro built a High Performance Server Design & Development House for an ODM Customer |
| To develop an anti-virus agent such that whenever files on NAS storage device are accessed by multiple Windows clients, the files need to be scanned by the anti-virus agent by interfacing with different vendor provided scan engines. |
Scale up engineering team to develop channel and ODM servers. Completely offload the high performance server development including design, development, prototyping, testing, validation, certification and transfer to manufacturing. |
|
More
|
More
|
Industries Served
Consumer Electronics
|
| Development of HD DVD Graphics Application Software |
| Our Client is a leading consumer company based in Japan. Wipro developed the graphics application software framework for the client’s HD DVD players that was launched recently in the market. |
|
More
|
| |
Industries Served
Automotive Electronics
|
|
|
|
| Magneti Marelli: Developed a Driver Infotainment System for Automobiles Player |
Hands Free Telephony |
| Wipro leverages its telematics expertise to assist the client in building an integrated infotainment application encompassing audio systems, wireless communication using GSM, navigation through GPS, etc. And uses its in-house tools like CodeGEN, SmartCover, Humbug and TCube to deliver it faster and better. |
Wipro helps in launching of Bluetooth(r) enabled hands-free telephony system in a very short duration of seven months. |
|
More
|
More
|
| |
|
| Platform migration of an Automotive Body Electronics System |
Development of a HDD-based Data Logging Tool for Studying Driver Behavior |
| Taking complete responsibility of the embedded software development including validation testing for a leading tier-1 automotive supplier, headquartered in the US. |
The project was the development of a hard disk drive-based data logging tool that captured and analyzed driver behavior when it came to usage of the dashboard of the navigation unit. |
|
More
|
More
|
| |
|
| Wipro team helps client in developing adaptive front light system |
Developing Electronics Shift on the Fly (ESOF) – 4 x 4 Module |
| The project was about the development of boot loader, diagnostics and unit testing of Adaptive Front Light System. |
The project was the migration of the electronics shift on the fly (ESOF) – 4 X 4 module into a new hardware platform. |
|
More
|
More
|
| |
|
| Wipro helps its Client in Developing Power Assist Steering ECU |
Demonstrates Nearby Cars Matching in Advanced Safety Vehicles Project |
| An electric motor coupled with the steering column through a gear mechanism. Whenever the driver applies a torque to the steering wheel, the motor provides additional torque thereby reducing the effort of the driver. The total torque (driver + motor) drives the steering column. |
The project was the development of a safety system for Advanced Safety Vehicles Project. The project used the new technology - DSRC receivers for matching nearby cars onto a dashboard fitted in the vehicle to avoid accidents. |
|
More
|
More
|
| |
|
| Development of HMI for Turn-by-Turn Navigation System |
Development of a Car Audio System |
| The project was the development of HMI for turn-by-turn navigation system for several models of cars. |
A leading OEM in the US is developing an audio system for its cars and was looking for a strategic partner to develop the same. The project involved extensive interaction with the customer at their US-based facility with some components developed offshore at India. The system is in production now. |
|
More
|
More
|
| |
| Demonstrates a Blend of Cutting Edge Bluetooth Services in Record Time |
| The project was the development of a hands free system with support of multiple Bluetooth profiles (HFP, A2DP and AVRCP) and profile switching capabilities. The hands free system is capable of performing audio streaming through Bluetooth simultaneously handling Bluetooth telephony services. |
|
More
|
Industries Served
Industrial Automation
|
|
|
|
| Development of Safety Critical Control System |
Reverse-engineering & Enhancement of Legacy FPD Bonder Software |
| Design and development of complete software for control and managing the cabin and cargo functionalities of a freighter aircraft. |
Reverse-engineering and enhancement of existing FPD bonder software to meet new technology requirements. |
|
More
|
More
|
| |
|
| Wipro Tests Railway Signaling Software for Trains with Speed Greater than 300 Kmph |
Designing a New SCADA Product |
| Testing strategy for railway signaling software. |
Wipro has helped major a SCADA supplier to design its SCADA products, upgrade them to leverage modern technological advances towards both lowering costs and improving competitiveness and margins. |
|
More
|
More
|
| |
|
| An Automated Tool for a GUI-based Security System Layout Design |
Development of Semiconductor Plant Simulator to Boost Productivity |
| Need for a semi-automated tool (system) for the design of security systems for a range of floor plans and security needs – (sales tool for security systems firm). |
To develop a simulation package for simulating film deposition by chemical and physical vapor deposition, film removal, thermal processing, electromechanical plating and chemical mechanical polishing in semi conductor manufacturing equipments. |
|
More
|
More
|
| |
|
| Sub-sea Well Monitoring and Control |
New Features for the Server of TOC Analyzer |
| Development of control application and integration with other applications and devices to monitor and control sub-sea well. |
Development of new features for server of TOC analyzer to enter new markets. |
|
More
|
More
|
Industries Served
Software Products
|
|
|
|
| End-to-End Product Testing for Information Security and Anti-Virus Software |
End-to-End QA for Anti-Virus Software |
| To have a successful security product in market at the right time for home and small office users that will enable them to protect their PC from outside threats and viruses. |
To have a successful security product in market for free of cost through partners at the right time for home and small office users that will enable them to identify threats and viruses and also protecting the PC from them. |
|
More
|
More
|
| |
|
| Product Testing for Security Software |
End-to-End Product Testing for a Security Software Suite |
| To come out with the successful product to address time to market with all the major features in the security product domain addressing home & small office users that will enable them to protect their PC against phishing and pharming. |
To have an all-in-one security product in market at the right time for home users that will enable them to protect their PC and their information secure by providing them proven and industry leading security features, PC tune up, backup and anti-phishing features thereby providing a complete protection solution. |
|
More
|
More
|
| |
|
| Log Analysis for a Leading Log Management Software Vendor |
Development of Security SDK for a Leading Software Vendor |
| To support log analysis of various enterprise products through a unified log management solution. This solution not only helps the administrators in monitoring the health and operations of enterprise products, it also provides support for various regulatory compliance certifications by providing required reports. |
To develop a security SDK for embedded systems that helps the OEMs to integrate various authentication methods into their applications. Some of the authentication methods include - digital certificates, user repository in LDAP, Kerberos, etc. This SDK also helps in supporting secure communication by means of IPSEC and port-based authentication using 802.1x standards. |
|
More
|
More
|
| |
|
| Complete Product Ownership for Security and System Utilities Product Suite |
Total Cost of Ownership - Product Support |
| To come out with the successful product to address time to market with all the major features in the security product domain. To help the client in extending the life of and end-of-life product by 3-4 years. |
The client needed to focus on enhancing the features of the product and targeting new customers, rather than wasting resources on the product support. Client also needed to improve the response time by solving the issues at a much faster rate. |
|
More
|
More
|
Industries Served
Semiconductors
|
|
|
|
| Peripheral Model Development |
FPGA Prototype for an ARM based Automotive Microcontroller based Automotive Microcontroller |
| To develop peripheral models and integrate them into a virtual system to enable architecture exploration and Firmware development & testing. |
To develop a complete prototype of a complex ARM Core based Automotive Microcontroller on an FPGA based Board to help speed up Operating. Systems, Debug Tools and Application Development. |
|
More
|
More
|
Services Offered
Product Lifecycle Management (PLM)
|
|
|
|
| PLM Product Evaluation |
Leveraging PLM Data for Sales and Detailed Engineering Product Configuration |
| The need was to carry out a product neutral evaluation to suggest the best fit PLM platform for the corporate PLM initiative. |
Customization and implementation of PLM system for global R&D locations.The activities involved ideation, design and development of a product configurator for sales and detailed engineering, and world wide rollout and support. |
|
More
|
More
|
| |
| End-to-End Design Data Management Across Value Chain |
| An application to centralize the management of programs, designs, documents and change requests of semiconductor product development for effective business monitoring and quality delivery of design solutions. |
|
More
|
Services Offered
Product Strategy & Architecture
|
|
|
|
| Wireless Sensor Networks – Market Sizing and Architecture Forecast |
Competitive Analysis of Client’s Software Security Product |
| Establish solid five year market forecasts and platform architecture for specific uses of wireless sensor networks. |
Establish a lab-based feature-function benchmarking of client’s security product against those of its competitors. |
|
More
|
More
|
| |
|
| High Tech Consumer Product Insight and Innovation |
| Validate the concept and market viability of an open pnp (plug-and-play) system. |
|
More
|
Services Offered
Silicon
|
|
|
|
| Wipro develops ASIC for a leading instrumentation company in Europe |
Wipro helps develop ASIC for a global pharmaceutical company |
| Realization of ASIC, for measuring service of a European instrumentation company. |
Design, test and production of ASIC for a US based pharma major's dispensing device. |
| More |
More |
| |
|
| Reengineering an ASIC design for a set-top box |
Test engineering service for a SoC for PC based entertainment application |
| The deep sub-micron design and the verification of such a large ASIC was a very challenging task, which had to be carefully handled and carried out. The total solution included architectural enhancements, handling design changes, verification, timing closure and design for testability (DFT). |
Wipro is responsible for the test architecture, test design implementation, test vector generation and tester debug for this 20+ Million gate SoC. It consists of repairable memory, SRAM, ROM and Multiport register files for a total of 14Mbit on-chip memory. It runs on 3 high speed clocks, generated by on-chip PLLs, between 266 – 433 MHz. |
| More |
More |
| |
|
| ASIC design for set-top box |
Standard Cell Library development |
| The challenge was design of two modules for a System-on-Chip, which would form the core of the customer's pioneering set-top box architecture. |
The challenge was development of five standard Cell Library designs of around 550 cells in each library with access to 0.1, 0.12, 0.16, 0.2 micron. |
| More |
More |
| |
|
| A low power, ARM based wireless System-on-Chip design is taken through integration, physical design and manufacturing handoff |
Functional verification of a packet processing engine ASIC |
| The challenge was Wipro’s design execution that involved RTL synthesis all the way to GDSII and foundry support for silicon tapeout with TSMC’s 0.18-micron technology. |
The customer wanted to improve performance and features of a previous generation ASIC and enhance it to support 10 Gigabit Ethernet links. This packet processing engine ASIC forms part of a high bandwidth gigabit Ethernet switch that supports layer 2, 3, 4 switch / router capabilities. |
| More |
More |
| |
| Innovative product design helps in crashing time-to-market of high-performance signal processing solution by 30% |
| Innovative product design helps in crashing time-to-market of high-performance signal processing solution by 30% |
| More |
System
|
|
|
|
| Development of an ATM network processor board and software |
System product engineering: Providing end-to-end solutions for HDTV digital card |
| The challenge was to design a board targeted for portable test equipment having stringent size and interface constraints and implementation of various ATM standards in FPGA . |
To provide ATSC/Open cable ready solution by eight months. |
|
More
|
More
|
| |
|
| Value engineering: Enhancing revenues through extended product life |
Wipro architects and tapes out a 0.13 micron, low-power design or MP3 SoC in 6 months |
| The Client wanted to extend the life of one of their highly successful Industrial Automation products. |
Client wanted a low-power design for a SoC for MP3 player. |
|
More
|
More
|
| |
|
| Addressing complex board designs as well as time to market concerns |
Design of a hands free car telephony system |
| This project required the complete design & development of a very high end Dual Processor Board providing Ethernet Switching capabilities. Moreover since the customer intended to increase market share in the networking area by bringing out newer products with enhanced features before the competition, this development was to be completed within a very aggressive timeline. |
The client wanted to have a Hands-free car telephony system with very good audio quality (key factor for this design). Other than the technical challenges in terms of project management the customer division had no prior offshore outsourcing experience. Thus, they outsourced this design work to a local firm in the US. |
|
More
|
More
|
| |
|
| DSP based multimedia hardware reference platforms built for a leading US semiconductor manufacturer |
Hex DS3/Dual OC3 Line card for an Optical edge switch |
| The challenge was the development of reference surround sound platforms and audio reference designs around the customer’s DSPs and mixed signal products. |
The customer was foraying into the ISP POP market by developing state-of-the-art edge routers. The objective was to provide maximum port density with an assured magical “five nines” system reliability. Wipro was to develop one of the key components of the system, a line card supporting 6 channelized DS3 or Dual OC3 line interfaces. |
|
More
|
More
|
| |
|
| Value engineering: Re-design of a display board for the infant incubator system |
Providing reference design solution for a DVD+RW: Faster, better and at a lower cost |
| Most of the complex video/audio processing sub-systems had to operate at 160MHz. Design of a DDR SDRAM controller that operates at 166MHz DDR. Seamless integration with third party cores for PCI and PCI-X. To optimize (both architecture and implementation) and fit 12 Million gates logic design in 8 Million gates FPGA, for achieving cost benefits. |
To provide reference design solution for the NAFTA DVD + RW market using chips from the vendor with a competitive product cost while developing the decoder ASIC and reference solution in parallel. |
|
More
|
More
|
| |
|
| Value engineering: Re-design of a display board for the infant incubator system |
Full product ownership and sustenance of entire range of telecom switches |
| The client wanted to Upgrade LCD Display module on its leading infant incubator system by replacing EL LCD with TFT LCD. This required hardware modification and porting of the new software to fit new hardware platform The new board to be designed had to be fully compatible with all the other components of the existing system; this had to be complemented with software supporting 16bits per pixel compared to the existing 1 bit. |
The client wanted to outsource sustenance activities for its entire range of TDM+IP based telecom switches. The switches consisted of Analog Lines, Trunks, Digital Trunks, ISDN Lines, Trunks, ISDN Processing Cards, VoIP Cards, Clock, Resource cards (switching, tone, conference, etc.), Processor Platforms, Power supplies, System cabinet/chassis and Digital telephone sets. |
|
More
|
More
|
Services Offered
Tandem NonStop Practice
|
|
|
|
| Fuel Card Transaction |
Postage Stamping |
| Implement global delivery model for support and development activities of application running on mission critical HP Nonstop platform. |
Support and development activities of application running on mission critical HP Nonstop platform. |
|
More
|
More
|
Services Offered
DSP
|
|
|
|
| H.264 QVGA Encoder |
Porting and Optimization of WMA 9.0 Decoder For Audio CD Player Project |
| A real time extreme performance H.264 QVGA Video Encoder System developed for the Video Broadcasting Solutions division of a Leading Consumer Electronics company in Japan. |
Porting of WMA Decoder onto client specific DSP and optimization of performance and memory to run real time. Integration of WMA Decoder into the Software player application. |
| More |
More |
| |
|
| H.263 Encoder |
AMR-Wideband Speech Codec |
| Sign-language support / rate-control enhancements implemented over a standard H.263 QCIF/CIF encoder for the R&D division of a leading telecommunications company in Japan. |
Wipro’s DSP and Multimedia Group constantly invest to create re-usable IP blocks to help customers speed to market. As part of this strategy, Wipro had created optimized implementation of AMR-Wideband on ARM11. AMR-Wideband speech codec is a de-facto standard adopted by Wireless and Wireline standards body. |
| More |
More |
| |
| Reference Design: Multi-Format Audio CD Player |
| To develop a real-time Audio CD player application on a 2-DSP architecture by integrating different codecs like MP3, WMA and Wave decoders along with the different file systems, CD reading capabilities with error resilience features for an European customer. |
| More |
Services Offered
Engineering Design Services
|
|
|
|
| Aircraft Seat Analysis |
Optimisation of Aircraft Floor Panel |
| Wipro helps in the strength and stiffness analysis of pilot and passenger seats |
Wipro helps in improve the buckling load carrying capability of a floor panel of a cargo airplane. |
|
More
|
More
|
| |
|
| Side Cargo Door Actuator Arm Analysis |
Composite Flap Analysis |
| Wipro performs the finite element modelling of a complex actuator arm |
Wipro helps domestic aircraft manufacturer in composite flap analysis for trainer aircraft. |
|
More
|
More
|
| |
|
| Reverse Engineering of Evaporator Coil |
RoHS Compliance |
| Tear down of the assembly using non contact method and to do reverse engineering of the coil assembly and fins. |
Analyzing, find alternate & validate components/parts spread across 97 PCB items. Validating 5500 components and conducting Compliance tests. |
|
More
|
More
|
| |
|
| Optimization/Redesign of excavator attachments |
Innovative Front End Design by using high strength Steel. |
| An old excavator attachment design of a very successful excavator model in the market for a construction equipment manufacturer. |
Wipro helps in optimizing the existing design of Front Rail. |
|
More
|
More
|
| |
|
| Development of Movable Deformable Barrier |
Crashworthiness |
| Simulation of LTV in a Vehicle to Vehicle Impact. |
To meet various crash worthiness requirements as per ECE regulations. |
|
More
|
More
|
| |
|
| Product Sustenance |
New Product Development of Hand Held device |
| How Wipro helped in System Integration Testing, Hardware Integration testing, Manufacturing Support, Technical Publications. |
Development of a Hand held device similar to a Mobile phone which helps in accessing Internet data. |
|
More
|
More
|
| |
| Value Engineering of Sunroof Systems |
| Wipro helps in reducing the sunroof assembly cost |
|
More
|
|



Subscribe to 'Peer Ping' our monthly newsletter
Request for Information
 White Papers
Extended engineering: A new perspective on offshore product engineering
More White Papers
Case Studies
Server partner technical support for a proprietary Unix OS
More Case Studies
News
Wipro and Selectica announce alliance
More News
Events
Comsware 2007,
January 07 to 12, 2007
Venue: Bangalore, India
More Events |